In order to resolve this issue, your device or any other devices you want to connect with this same issue, I suggest you do this; Open the Windows PowerShell (Admin) and type: chkdsk /f/r/x. It will inform: 'The type of the file system is NTFS. Cannot lock current drive. Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)' select Y then re-boot your machine and follow the on screen prompts.

• Device Descriptor Request Failed Code 43
• Usb Device Descriptor Driver Download
• Usb Device Descriptor Failed

The device manager has Universal Serial Bus Controllers Flag USB Device Not Recognized. Device Descriptor Request Failed First thing i did was check my USB drivers, but there is not problem with them.

After the reboot, again, Windows PowerShell (Admin) and type: sfc /scannow and allow the process to finish. Now clean the registry with a reputable program such as CCleaner then take a note of the device/s name and select 'run' from the Windows menu list bottom left. Type 'regedit' without the apostrophes and open the registry. Select 'Edit' then Search. And type the brand name of the device in the search bar.

The search results will point you to a series of strings of the device that was giving the.(device descriptor request failed) code 43. error message.

Every string in the registry with the name of your device will need to be deleted but ensure it is the device's name from which was generating this error example; Logitech, Seagate, whatever brands device name that has generated this error code! Ensure you have removed every last trace of your devices name in the registry. Then after completion use the CCleaner again to remove all known traces and re-install the devices software if this is the case. Your device will come back to life without the error message and start to work again. Reasons why this happen are not entirely certain but often PC's pick up spyware/malware/virus's and corrupt the registry's strings other times, updates and upgrades in particular over lap information and again, corrupt the software and its registration process.

I have Windows 10 installed on my Dell Laptop and have a Canon IP7240 Printer. When I recently plugged my printer Cable into the USB port on my Laptop, I get I get a message 'USB Device Not recognised' I when into the device manager and under Universal serial bus controllers, there is device, “Unknown USB Device (Device descriptor request failed)” I un-installed this, restarted my Laptop, but the error came back after plugging in the USB cable after restarting It would be appreciated, if someone could kindly assist me in resolving this. To solve the issue.

Your USB device failed to be recognized or read by Windows 10? You are experiencing the USB device descriptor failure on Windows 10? Most of you have had the USB issue that when you were connecting your USB device to your PC, but to be told that it is not recognized by Windows 10. Do not worry, it is rather foolproof to resolve this USB device failed enumeration error as long as you can follow the steps earnestly. USB device Descriptor contains various information about the USB device and it is also the main source to identify different USB devices. So if you come across the USB device descriptor failure on Windows 10, it is certain that your USB device cannot be recognized by Windows 10, and maybe you can find that the device status of this USB device shows you the device manager code error 43: This device cannot be recognized.

Contents: Solution 1: Check USB Devices and USB Port Before you start your solution, you should ensure that your USB device is physically perfect. You need to plug the USB device to another port to see if it is the USB port that causes your USB device cannot be recognized by Windows 10. You should use the USB device on another PC. If the USB device descriptor failure persists on another PC, maybe you need to change a new USB device. Or if the USB port and the USB device are in good condition, you need to find the further solutions in this post below. Related Knowledge: Solution 2: Update USB Driver Driver issue is always the main cause of, for USB device descriptor failure, there is no exception. On condition of this fact, you would better update your USB driver right away.

To make things easier, you are strongly advised to make full use of Driver Doctor to update the USB drivers for Windows 10. In the first place, you are supposed to on your PC.

Device Descriptor Request Failed Code 43

You can let Driver Doctor search your computer for the problematic drivers for Windows 10. Of course, if you are cautious and have no interest in using a third-party software to update USB drivers, you can also turn to device manager. Or you can go to the official site of your USB or PC to download and install the latest USB driver on your own. Related View: But if with the latest USB driver, the USB device failed enumeration or USB device request failed error still persists on Windows 10, you should go ahead to find other ways. Solution 3: Turn Off Fast Startup to Fix USB Device Failure It is possible that the USB fast boot makes the computer perform so fast that Windows 10 cannot detect the USB device.

So the USB device descriptor failure happened to you. To resolve it, you are supposed to disable the fast startup of USB devices.

To turn off the fast startup to resolve the USB device descriptor failure on Windows 10, you should at the very beginning and then perform a series of actions under Power Options. For further details, you can see the tutorials with pictures from here:. Once you have disabled the fast startup for USB device, you can avoid the possibility that Windows 10 cannot recognize the USB device because of the fast reboot. So if the USB device descriptor failure lasts on Windows 10, you can keep going on. Solution 4: Run USB Troubleshooter Now that the up-to-date USB driver is to no avail to fix the USB device issue on Windows 10, you now can employ Windows Hardware and Sound troubleshooter to have a try. It is a built-in detecting tool, so you can trust it in its security.

Usb Device Descriptor Driver Download

Type Troubleshooting in the search box and press Enter to open it. Find out Hardware and Devices and click it. Choose to Run the Troubleshooter.

Then Windows 10 will detect the problem and if it is the basic device errors, it can also fix it automatically. In a word, it is no doubt that you can find a solution to fix the USB device descriptor failure or USB device not recognized by Windows 10 issue.

Usb Device Descriptor Failed

Related Articles.